How to Use Merkury Camera Without Wi-Fi

July 10, 2024 Sadia

You still couldn’t install a Mercury camera due to the lack of a Wi-Fi connection? Well, you are not the first one facing all this. While taking smart surveillance and security into consideration, Merkury smart cameras are undoubtedly the first choice. How to Use Merkury Camera Without Wi-Fi, however, is a question that remains on the top of those who want to use Merkury without any hassle.

24/7 active smart surveillance, smart face, and motion detection, 1080p HD picture quality, high-quality recording, etc., are making it to the top of the bucket. The best part is that you can control it remotely from your Android phone through a Geeni mobile application. You can access the recording and the live footage even when you are not around.

Most people prefer a Wi-Fi network for operating their Merkury cameras, but using Merkury cameras without Wi-Fi is also possible. For that purpose, you need to follow a certain set of steps. Let’s not waste another minute and dive into the ultimate guide.

Table of Contents

Before you Begin:

Before diving into the actual process, you need to gather all the necessary tools and equipment. The following is the list of apparatus required to set up the Merkury camera without Wi-Fi.

MicroSD card:

You may need a MicroSD card for local storage, but it depends on whether your camera model supports one.

The size and capacity of your microSD card must be compatible with your Merkury smart camera.

Ethernet cable:

If you want to connect the camera to the router directly, you will need an Ethernet cable.

Geeni app:

It is the most important thing to have on your phone to keep control of and access to your camera.

You can install it from the Play Store or App Store.

USB cable:

the physical connection between the camera and the power adaptor.

Smartphone with hotspot:

For people who wish to use a mobile hotspot instead of Wi-Fi, it is necessary to have a smartphone with a mobile hotspot and a flawless data package.

How to use Merkury camera without Wi-Fi:

There are four methods to set up a mercury camera without Wi-Fi. For every process, there is a certain set of steps and a set of tools and equipment. To use a Merkury camera without Wi-Fi, you may adopt one of the four options, depending on what your camera supports. You can use your camera with a mobile hotspot, an Ethernet connection, a Micro SD card, and a USB cable.

Read all the methods till the end to check which one suits you.

Ethernet connection:

If your Merkury camera supports an Ethernet connection, you can follow this method. The Ethernet cable will allow wired connections between the camera and the router.
The things required for the connection are a USB cable, an Ethernet cable, and an adaptor.
First, connect the camera to one end of the Ethernet cable and the router to the other end. You will see the camera’s LED light blinking after success.
Now install the Geeni mobile application and log in to your Geeni account. If you don’t have an account, create a Geeni account before proceeding further.
Now, navigate to your camera and open settings. Select ‘Ethernet’ as the preferred mode of connection.
You are done with the connection; you can now configure additional settings for your camera through the app.

Smartphone’s hotspot:

The second option is for people who want to use a Merkury camera without Wi-Fi; the second option is a mobile hotspot.
First, go to the mobile’s settings and turn on the mobile hotspot.
Connect your Merkury camera to the power source.
Download the Geeni app from the Play Store or App Store and create your account.
Navigate to “connection methods” in “settings” and select “Mobile Hotspot.”
Now, enter your mobile hotspot’s name and password.
Finally, let the light turn on, or your phone gets a notification confirming success.
Most of the users think it is the best practice when you don’t have access to a stable Wi-Fi connection at the moment.
But the charges of hotspots and mobile phones’ battery drainage may cause difficulties for you.

Wired USB connection:

If your camera supports the USB connection, you can follow this method too.
The tools required are a computer, a USB cable, and a camera.
Before you begin, install the required drivers so that your computer can recognize your camera.
Connect the computer on one side and the camera on the other side of the USB cable.
Open “My Computer” or “This PC” and look for your camera listed on a separate drive.
Through this method, the computer will store the footage in local storage. Live feed and camera configuration are also allowed.
However, the drawback is that you must place the camera near the computer, which may be outside your desired location. And your computer must be working 24/7 for continuous monitoring, which is not less expensive at all.

MicroSD card for storage:

If the model of your camera supports a MicroSD card, you can follow this process.
Purchase a card that is compatible with your camera.
Power off your camera, insert the MicroSD card and turn on the camera.
Open the Geeni app and configure the camera’s settings for microSD card storage.
In the Geeni app, you can view and delete all the recordings on your phone.
However, the limited storage capacity of microSD cards may put you in trouble.

Troubleshooting Tips:

If your microSD card is not found, remove it, clean the slot, and insert it again.
If your camera can’t connect to the hotspot, consider restarting the hotspot.
If the USB connection is unsuccessful, try connecting to any other USB port and check if your cable is working fine or not.
Make sure your Merkury camera offers offline usage if you use offline methods.
Make sure that your camera’s firmware is up to date with the latest updates.
If nothing works, don’t hesitate to contact customer support or the help center at Merkury.

FAQs:

Q1: Can I use my Merkury camera without a Wi-Fi connection?

Yes, you can use the Merkury camera without Wi-Fi. You can use an Ethernet connection, USB cable, MicroSD, or mobile hotspot for this purpose. It depends on your camera and the mode of connection it supports.

Q2: What are the advantages of using my Merkury camera without Wi-Fi?

Using a Merkury camera without Wi-Fi may help in several ways, like enhanced privacy, reliability, less dependency on Wi-Fi, faster setup, less battery and data usage, and more control.

Q3: Can I still record and save footage locally without Wi-Fi?

Yes, you can still record and save footage locally without Wi-Fi. If your Merkury camera has a microSD card slot, you can insert a microSD card with compatible storage in it, and the camera will store the footage directly on the card.

Q4: Are there any limitations to using my Merkury camera without Wi-Fi?

Yes, there are limitations to using your Merkury camera without Wi-Fi. Without Wi-Fi, Merkury cameras don’t offer remote access, notifications, and alerts, cloud storage, firmware updates, or integration to some extent.

Q5: Can I use my Merkury camera with a mobile hotspot instead of Wi-Fi?

Yes, it is possible to use your Merkury camera with a mobile hotspot. Turn on your mobile hotspot and connect the mercury camera to the hotspot. Now verify the connection by seeing the camera’s live feed and configure settings in the Geeni app if you want.

Conclusion:

Summarizing all the above discussion, you may only have active and steady Wi-Fi at some point. But it would undoubtedly help if you had smart surveillance 24/7. Talking about smart surveillance means the need for Mercury smart cameras.

Mercury smart cameras provide a one-tap solution to all your problems. The smart motion detection, face detection, 1080p and 720p footage recording, and live feed—nobody wants to miss it. Most importantly, the camera’s coordination with the Geeni app is super tempting.

While talking about how to use a Merkury camera without Wi-Fi, you may adopt any of the four methods listed above. You can use an Ethernet connection, a USB cable, a mobile hotspot, or a MicroSD card for this purpose.

Now, the decision of what to choose for you depends on the type of camera you have and what it supports. You can read the user manual and look at your camera hardware carefully. Hopefully, the article was helpful. Please let us know your thoughts on this.

HowiPedia